2 mm APP Glass Fiber Membranes

MAK POLYPLAST STANDARD is a polymeric waterproofing membrane consisting of Seven layers. The Centre Core incorporates 45 gsm Fiber Glass Tissue lends mechanical strength and dimensional stability to the product. The Fiber Glass Tissue acts as reinforcement barrier against water and moisture. The Centre Core is provided on both sides with APP polymer modified bitumen with properties of high Softening point, Heat resistance and high Penetration making it ideal for waterproofing purposes. The polymer modified bitumen is protected on both sides with thermo-fusible High Molecular High Density Polyethylene Film. It has a high tensile strength and cold resistivity to adapt to all contours.

Features:

1) UV Resistant
2) Increase flexibility at low temperature
3) Excellent weathering
4) Fire resistant

Areas of Application:

1) Airport aprons & Ramp areas
2) Bridges & Tunnels
3) Inverted roofs & Parapets
4) Terrace, Balconies & Patios
5) Concrete Foundation & Footings
6) Basement & Pile Heads
7) Swimming Pools
8) Water retaining bodies and tanks.

Application Procedure:

1. The Surface has to be cleaned to have a smooth surface.
2. Apply a coat of MAK PRIMER @ 0.3 L /sqm 3. MAK POLYPLAST STANDARD is unrolled over the coated Surface and bonded completely on the substrate with overlaps of 10 cm on the side and 15 cm on the end joints. The overlaps are sealed with Flame or Blown Bitumen.
4. Laying 120 gsm geotextile as separation layer for covering application
5. MAK POLYPLAST SUPERLAY is topped with Cement Screed or tiles for covering  application otherwise for exposed areas MAK SILVER (Bituminous paint) is to be laid over the membrane.

Health and Safety:

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.